Hultdins SuperCut 30 СС

New saw option for Log Max 5000, 6000, 6000Twin, 7000 and 7000Twin


The all new Hultdins SuperCut 30 cc equipped with a saw motor from Parker deliverers a higher torque and better efficiency. The motor is optimized for saw applications and equipped with Power Boost which can deliver up to 5 kW more power plus a valve plate optimized for high rpms.

As usual for the SuperCut models the key features are a built in saw bar feeder without exposed cylinder rod. Automatic chain tensioner is standard and the
number of hoses in the saw box has been eliminated thanks to built-in oil channels.

 

 

 

The following sword models fits the new SuperCut 30 cc:

Saw bar holder: Length: Sprocket: Chain: Link count: Stump treatment: Article nr.:
#18 60  Z=18  18H  76  No 554196
#18 67,5  Z=18  18H  83  No 554196
#18 75  Z=18  18H  90  No 554196
#19 82  Z=18  18H  98  No 554197
#19 90  Z=18  18H  106  No 554197
#20 60  Z=18  18H  76  Yes 554198
#20 67,5  Z=18  18H  83  Yes 554198
#20 75  Z=18  18H  90  Yes 554198
#21 82  Z=18  18H  98  Yes 554199
#21 90  Z=18  18H  106  Yes 554199

 
Rebuild kit
 

Log Max heads with Hultdins SuperCut 19 cc can be rebuilt on site with the new 30 cc motor by ordering the kit nr; 032172 for Log Max 5000, 032173 for Log Max 6000, 032174 for Log Max 7000. Note that the kits does not contain saw bar holders or saw bars which are ordered separately.

Note
The possibility to use the 30 cc motor applies to saw units starting at serial number 035-13386 which are found on Log Max heads newer than summer 2014. Heads with older saw units have to exchange the whole saw unit.

 

 

Hultdins SuperCut 30 СС

28.янв..17 18:22

New saw option for Log Max 5000, 6000, 6000Twin, 7000 and 7000Twin The all new Hultdins SuperCut 30 cc equipped with a saw motor from Parker deliverers a higher torque and better efficiency. The motor is optimized for saw applicatio (...)

Подробнее

New casted processor knives

28.янв..17 18:22

Cast processor knives with welded tips Log Max releases a new delimbing knife option for Log Max 6000B and 6000Twin. The new casted processor knives with welded tips are designed for the best possible result when working on deck. The (...)

Подробнее

New welded upper knife

28.янв..17 18:22

New upper knife with replaceable knife edge Log Max is introducing a new upper knife to the models Log Max E6, 6000Twin, 7000Twin and Log Max 7000XT. The knife is welded and has a replaceable knife edge. Thanks to this the upper knif (...)

Подробнее

Updated lower delimbing knives

28.янв..17 18:22

Lower delimbing knives on Log Max E6 updated Log Max has updated the lower delimbing knives for Log Max E6. The new update includes several improvements, updated knife edge, new knife edge outline, additional material to the knife bo (...)

Подробнее

Updated feed roller arms

28.янв..17 18:22

Feed roller arms for Log Max 10000XT updated. Log Max is now introducing updated feed roller arms for Log Max 10000 XT. The updated feed roller arms has received an overhaul in the attachment areas. Additional material has been added (...)

Подробнее

Welded measuring wheel arm

28.янв..17 18:22

New optional welded measuring wheel arm Log Max is now introducing an alternative measuring wheel arm for Log Max 6000B, 6000Twin. The optional measuring wheel arm is welded instead of the standard measuring wheel arm which is casted (...)

Подробнее

New hose guard available

28.янв..17 18:22

A new hose guard is available A new hose guard is now available for Log Max 6000B and 7000C harvesting heads. This hose guard will help to prevent damage or tangling of the hoses. This new hose guard is specially developed for (...)

Подробнее

Bosch Rexroth MCR 5-F

28.янв..17 18:22

New roller motor MCR 5-F Bosch Rexroth for forest application Log Max is now introducing a new roller motor for Log Max 5000D. It has several new features that improves the durability. The roller motor is available in two different v (...)

Подробнее

Drainage holes on feed rollers

28.янв..17 18:22

Updated drainage holes on feed rollers Log Max is now introducing updated feed rollers with more and bigger drainage holes. This update is a general update that applies on all feed rollers for the heads listed below. The additional d (...)

Подробнее

Saw dust protection kit

28.янв..17 18:22

Saw dust protection kit update Log Max is now introducing an updated saw dust protection kit for the new chain shot guard. The new saw dust protection kit has been redesigned to be able to mount together with the new chain shot guard (...)

Подробнее

Updated protective covers

28.янв..17 18:22

Updated protective covers Log Max is now introducing updated protective covers for roller arm cylinder rods. This is a general update that applies on all protective covers for wheel arm cylinder rods, see the list below for which hea (...)

Подробнее

New field repair kits

28.янв..17 18:22

Log Max field repair kits updated Log Max is now introducing new field repair kits for all Log Max heads. All field repair kits have been revised and updated. The new field repair kits will be introduced from date 2014-01-01. General changes (...)

Подробнее

Attachment plate for felling link

28.янв..17 18:22

Attachment plate for felling link #039020 and #043021 An attachment plate is now available for felling link #039020 and #042021. This attachment plate is welded to the back of the felling link and therefore makes it possible to attac (...)

Подробнее

Updated reinforced felling link

28.янв..17 18:22

Updates to reinforced felling link #043021 Log Max has now updated the reinforced felling link #043021. The update makes it possible to fit a chain holder or a hose holder with rotation plate on the felling link. Chain holder is stan (...)

Подробнее